Irving Equipment Rentals
Construction Equipment Rentals in Irving, TX
Irving sits at the center of the Dallas–Fort Worth Metroplex. The City's comprehensive plan notes that it borders DFW Airport and neighboring cities, with little or no room left to expand its boundaries, so much of the work here happens inside and around existing offices in the Las Colinas Urban Center and warehouse and light industrial buildings along major corridors.
That mix makes material handling and work-at-height equipment the core of many Irving rentals. Use this page to match equipment to the job, then confirm availability, delivery and terms with providers that serve your site.
Local Work
Equipment Work in Irving
The Imagine Irving comprehensive plan includes a Manufacturing/Warehouse land use category for light manufacturing, warehousing and storage inside buildings, and envisions office, light industrial and logistics uses along major thoroughfares and State Highway 161. Racking installs, dock work, interior fit-outs and tenant turnovers in these buildings lean on forklifts, scissor lifts and telehandlers more than on earthmoving equipment.
In Las Colinas and other office areas, the work tends to be finish-outs, facade and window work, and site improvements around occupied buildings and parking areas. Slab scissor lifts with non-marking tires, compact booms and careful delivery timing matter here, because deliveries often share drives and loading areas with tenants.
Two features of Irving's geography also show up on jobsites. DFW Airport borders the city, so tall temporary equipment can trigger federal airspace notice. And the comprehensive plan notes that Irving's channels drain to the Elm Fork of the Trinity River, with flood control districts maintaining levees along Grapevine Creek, the Elm Fork, Bear Creek and Hackberry Creek, so ask early if your site sits near a levee or floodplain.
Weather matters on open yards and building exteriors. The National Weather Service office in Fort Worth notes that thunderstorms and severe weather peak in spring, and that large hail, damaging winds and flooding occur in the region nearly every year. Check each lift's rated wind limit, plan where machines will be parked overnight, and expect gravel and dirt yards to soften after heavy rain.
Featured Equipment
Equipment for Irving Projects
Forklift RentalsUnloading trailers, staging racking and moving palletized materials inside warehouse and light industrial buildings. Tell the provider if you need a warehouse forklift for a slab floor or a rough-terrain model for a gravel or dirt yard.
Scissor Lift RentalsRacking installs, ceiling and sprinkler work, lighting and interior finish-outs. Electric slab scissors fit through doors and aisles without marking floors; rough-terrain scissors suit exterior walls and unpaved areas.
Telehandler RentalsPlacing materials on roofs and upper floors, setting loads over obstacles and handling pallets on uneven yard surfaces where a standard forklift can't travel.
Boom Lift RentalsFacade, glazing and exterior maintenance on office buildings, and high exterior walls on warehouses. Check working height, outreach and whether the boom can reach from the drive or lot you have.
Skid Steer RentalsYard cleanup, grading around new docks and drives, and moving material with buckets, forks or a broom where space is tight between buildings and parked trailers.
Compactor & Roller RentalsCompacting subgrade and base under new paving, dock aprons and utility trenches. Plate compactors cover small patches; rollers make sense for larger yard and parking areas.
Site Rules
Before You Rent in Irving
Local rules and conditions worth checking before equipment arrives. Requirements change and depend on the project, so confirm the details with the agency for your site.
Tall equipment near DFW Airport
Federal rules require FAA notice for construction more than 200 feet above ground, or construction that exceeds an imaginary surface sloping 100 to 1 out to 20,000 feet from the nearest runway at airports like DFW. The FAA's notice form covers temporary structures such as cranes and must be filed at least 45 days before work starts.
Airport property has its own authority
Irving's comprehensive plan notes that DFW International Airport exercises its own land use regulations and authority. For work on airport property, confirm requirements with the airport rather than assuming City rules cover it.
Construction hours near homes
Irving's noise ordinance limits building construction, demolition, alteration and repair in or next to a residential district, and street excavation there, to 6 a.m. to 9 p.m. on weekdays and 7 a.m. to 8 p.m. on weekends, unless it's an emergency or the City issues an after-hours permit.
Delivery windows next to neighborhoods
The same ordinance restricts noise from loading or unloading materials and equipment at a business next to a residential area from 9 p.m. to 7 a.m. on weekdays and 9 p.m. to 9 a.m. on weekends. Schedule drop-offs and pickups at warehouses near homes inside those limits.
Right-of-way and street cuts
Construction in Irving's right-of-way requires a permit, and City code states that it's the City's policy not to cut streets or sidewalks; a cut needs prior approval. The City's permit application also asks contractors to contact the Traffic Department 48 hours before working within 500 feet of a signalized intersection.
Forklift operator training
OSHA's construction standard applies the same powered industrial truck operator training rules as general industry, so forklift operators need training and an evaluation before they run the truck. Ask the provider to send the operator's manual and capacity information with the machine.
Nearby Cities
Equipment Rentals Near Irving
FAQ
Questions About Renting in Irving
Do I need FAA approval to use a boom lift or crane near DFW Airport?
It depends on height and distance. FAA rules require notice for construction more than 200 feet above ground, or construction that penetrates a 100:1 surface extending 20,000 feet from the nearest runway at airports like DFW, and temporary structures such as cranes count. The FAA's online notice criteria tool shows if you need to file; if you do, file at least 45 days before work starts.
Which forklift do I need for an Irving warehouse job?
Indoors on a finished slab, a standard warehouse forklift is usually right. For gravel yards, unpaved lots or uneven ground, ask about a rough-terrain forklift or a telehandler. Share load weights, lift heights, aisle widths and door clearances with the provider.
Do I need to call 811 for yard and dock work in Irving?
Yes, if you'll dig, trench or set anything below grade. Texas law requires notice to a one-call center no later than 48 hours before excavation, not counting weekends and holidays, and no earlier than 14 days before. Texas811 takes requests by phone at 811 or online.
Can I get a lift into a finished office or retail space?
Usually, with the right machine. Ask for an electric slab scissor or compact boom with non-marking tires, check door widths, ramp or elevator limits and floor load ratings, and plan delivery around tenant hours.
Find Construction Equipment Rentals in Irving
Browse equipment categories to find the right machine for your project.